STEP 1

Unbox your sign, carefully hold your sign up against the wall of your choice, grab a friend to help if very long or heavy. Mark on the wall where your ideal spot to mount the sign is, making sure these match up with the predrilled holes on your neon sign.

Image of wall mounting a neon sign

STEP 2

Get your drill equipped with a twist drill bit and drill pilot holes exactly on the points you marked on the wall in step 2.

STEP 3

Unscrew the mounting. Place the longer hollow mounting pin up against the pilot hole.

Image of wall mounting a neon sign

STEP 4

Then place the smaller silver securing screw through the hollow entry. Screw the small silver securing screw through the hollow base and into the wall.

Image of wall mounting a neon sign

STEP 5

Place your sign up against these bases. Then simply screw the wider screws into each base, this will secure your sign onto the wall. Next plug the sign into the transformer and then into the wall plug. Its time to Light it up! #GETLIT

Image of wall mounting a neon sign
×

Loading